Global TopMini 4WD Chassis & Compatible Parts Catalogs
Mini 4WD cars and compatible parts listed by chassis
Get the lowdown on the different Mini 4WD chassis! From compatible parts to a list of which cars use which chassis, this page has plenty of information to help you choose your next car - and how to tune it.
※Some of the specifications listed on this page will change if different rollers, tires or other parts are used.
※Some of the parts in the compatible lists may not be fully usable with that chassis, i.e. only the pinion gear from a gear set can be used. Please be sure to check the item page for each part to get detailed information about compatibility.
Midship, double shaft motor layout
-
MA Chassis
The MA (Midship AERO) Chassis has its motor in the center, and features a design which focuses upon achieving outstanding aerodynamic performance. It has six individual low-friction rollers, a rear skid bar and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike.
Specifications
★Length: 156m, width: 97mm ★Wheelbase: 80mm ★Tread: 59.5mm ★Weight: 125.9g ★Ground clearance: 2.2mm
*Please note that the above specifications may change with the use of different tires, rollers, etc.
-
MS Chassis
The direct drive, double-shaft motor MS Chassis features a 3-piece set up split into nose, center and tail units for easy attachment and detachment. This tough chassis' form features an 80mm wheelbase to provide an advantage through corners.
Specifications
★Length: 152mm, width: 92mm ★Wheelbase: 80mm ★Tread: 67mm (front), 69mm (rear) ★Weight: 124.7g ★Ground clearance: 4mm ★Gear ratios: 4:1
*Please note that the above specifications are valid when using N-02 unit, large-diameter tires and alkaline batteries. Use of other components may alter values.
Front motor layout
-
FM-A Chassis
The FM-A chassis is a front motor unit with advanced aerodynamic themes that - thanks to its center of gravity toward the front - is at home on a whole variety of track types including those with frequent elevation changes. It comes equipped with a low-friction front skid bar and four rollers including highly stable 8mm thickness rear rollers. The chassis underside allows easy access to the motor and quick setup changes. Aircraft-inspired aero side stays allow attachment of a range of Grade-Up parts.
Specifications
★Length: 150mm, width: 97mm ★Wheelbase: 83mm ★Tread: 60mm ★Weight: 71g ★Ground clearance: 2.5mm
*Please note that the above specifications may change with the use of different tires, rollers, etc. -
Super FM Chassis
An evolution of the FM Chassis, the Super FM Chassis has an aerodynamically-advanced underside. It also has a strengthened bumper and cooling ducts to make it a great racer! This was the first chassis to feature a rear roller stay.
Specifications
★Length: 144mm, width: 90mm ★Wheelbase: 83mm ★Tread: 64mm ★Weight: 117.2g ★Ground clearance: 5.5mm ★Gear ratios: 5:1, 4:1
*Please note that the above specifications may change with the use of different tires, rollers, etc. -
FM Chassis
This veteran chassis features its motor mounted in the front, and correspondingly is right at home on undulating tracks thanks to the front-oriented center of balance.
Specifications
★Length: 132mm, width: 86mm ★Wheelbase: 83mm ★Tread: 64mm ★Weight: 113g ★Ground clearance: 7mm ★Gear ratios: 5:1, 4.2:1
*Please note that the above specifications may change with the use of different tires, rollers, etc.
Rear motor layout
-
VZ Chassis
The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS.
Specifications
★Length: 158mm, width: 98mm ★Wheelbase: 80mm ★Tread: 59.5.mm (Front), 65.5mm (Rear) ★Weight: 108.3g ★Ground clearance: 2.5mm ★Gear ratios: 3.5:1
*Please note that the above specifications may change with the use of different tires, rollers, etc. -
AR Chassis
Popular with drivers thanks to the ease of adjusting and maintaining it, the durable AR Chassis was the first to use 6 rollers, and it features the batteries in a low position to help it hug the ground. Users can also attach Grade Up and Option parts to the side of this 82mm wheelbase machine.
Specifications
★Length: 155mm, width: 97mm ★Wheelbase: 82mm ★Tread: 67mm ★Weight: 123.5g ★Ground clearance: 5mm ★Gear ratios: 4.2:1
*Please note that the above specifications may change with the use of different tires, rollers, etc. -
VS Chassis
The VS Chassis is a lightweight and compact chassis with a short wheelbase. Hinged gear cover and battery holders make maintenance a simple task, so this chassis really is an excellent blend of easy use and high performance!
Specifications
★Length: 145mm, width: 90mm ★Wheelbase: 80mm ★Tread: 64mm ★Weight: 113.8g ★Ground clearance: 5mm ★Gear ratios: 5:1, 4.2:1, 4:1
*Please note that the above specifications may change with the use of different tires, rollers, etc. -
Super TZ-X Chassis
The Super TZ-X Chassis is an evolution of the Super TZ Chassis, and it too offers the user wide tread in conjunction with a mid-length wheelbase. The front bumper has extra screw holes, and the chassis' rear stay is secured in 2 places.
Specifications
★Length: 148mm, width: 90mm ★Wheelbase: 82mm ★Tread: 68mm ★Weight: 115.4g ★Ground clearance: 5mm ★Gear ratios: 5:1, 4:1
*Please note that the above specifications may change with the use of different tires, rollers, etc.
-
Super TZ Chassis
In addition to its mid-length wheelbase and wide tread, the Super TZ Chassis has its batteries close to the ground and a flat underside to give it a low center of gravity. It utilizes a tough bumper and offers stability even at high speeds.
Specifications
★Length: 147mm, width: 90mm ★Wheelbase: 82mm ★Tread: 68mm ★Weight: 117.6g ★Ground clearance: 5mm ★Gear ratios: 5:1, 4:1
*Please note that the above specifications may change with the use of different tires, rollers, etc. -
Super XX Chassis
The Super XX Chassis is an evolution of the Super X Chassis which offers improved adaptability and durability. Wide roller settings are enabled thanks to its nose guard, and this stable chassis features great toughness plus enhanced side stay options.
Specifications
★Length: 153mm, width: 98mm ★Wheelbase: 84mm ★Tread: 70mm ★Weight: 119g ★Ground clearance: 1.9mm ★Gear ratios: 3.5:1
*Please note that the above specifications may change with the use of different tires, rollers, etc.
-
Super X Chassis
The Super X Chassis offers great durability and stability thanks to its wide tread and long wheelbase. The motor can be accessed from the underside of the machine, allowing speedy setting changes, while the rear stay is attached in 2 places.
Specifications
★Length: 156mm, width: 92mm ★Wheelbase: 84mm ★Tread: 70mm ★Weight: 111.8g ★Ground clearance: 5.2mm ★Gear ratios: 5:1, 4:1
*Please note that the above specifications may change with the use of different tires, rollers, etc. -
Super-II Chassis
The Super-II Chassis is the next generation of the Super-1 Chassis, and it features race-ready advancements such as a reinforced bumper, rear stay secured by 2 rotating switches and screw-secured cover. The chassis also offers excellent adaptability.
Specifications
★Length: 150mm, width: 97mm ★Wheelbase: 80mm ★Tread: 64mm ★Weight: 115g ★Ground clearance: 5.3mm ★Gear ratios: 4.2:1
*Please note that the above specifications may change with the use of different tires, rollers, etc.
-
Super-1 Chassis
The Super-1 Chassis is the next generation of the Zero Chassis, and it provides an enticing blend of speed and durability. Removable side stays give wide setting options, and when used with small front tires, the chassis has a 3mm ground clearance.
Specifications
★Length: 131mm, width: 90mm ★Wheelbase: 80mm ★Tread: 64mm ★Weight: 111.5g ★Ground clearance: 5mm ★Gear ratios: 5:1, 4:1
*Please note that the above specifications may change with the use of different tires, rollers, etc. -
Zero Chassis
Dropped motor and battery positions for a lower center of gravity, plus helical crown gears are just some of the Zero chassis' notable features. Its short wheelbase makes for great cornering.
Specifications
★Length: 131mm, width: 86mm ★Wheelbase: 80mm ★Tread: 64mm ★Weight: 109g ★Ground clearance: 5mm ★Gear ratios: 5:1, 4.2:1
*Please note that the above specifications may change with the use of different tires, rollers, etc. -
Type 5 Chassis
With a flat underside for great aerodynamics, and molded in thinner plastic for a lighter finish without surrendering durability, the Type 5 chassis offers superb stability on a long wheelbase.
Specifications
★Length: 132mm, width: 86mm ★Wheelbase: 82mm ★Tread: 64mm ★Weight: 113g ★Ground clearance: 6mm ★Gear ratios: 5:1, 4.2:1
*Please note that the above specifications may change with the use of different tires, rollers, etc. -
Type 4 Chassis
This evolution of the Type 2 chassis featured a 2mm lowered battery position. Its long wheelbase and rear center of gravity provide super stability on straight sections.
Specifications
★Length: 128mm, width: 86mm ★Wheelbase: 82mm ★Tread: 64mm ★Weight: 112g ★Ground clearance: 7mm ★Gear ratios: 4:1, 4.2:1
*Please note that the above specifications may change with the use of different tires, rollers, etc.
-
Type 3 Chassis
An on-road version of the Type 1 chassis, this unit features good ground clearance and a wide variety of setup options. Holes in the motor cover, etc. make for a lightweight finish.
Specifications
★Length: 127mm, width: 86mm ★Wheelbase: 80mm ★Tread: 64mm ★Weight: 115g ★Ground clearance: 9mm ★Gear ratios: 6.4:1, 5:1
*Please note that the above specifications may change with the use of different tires, rollers, etc. -
Type 2 Chassis
The first on-road Mini 4WD chassis features large-diameter slick tires and rollers as standard, plus a long wheelbase for super stability on straight sections.
Specifications
★Length: 128mm, width: 86mm ★Wheelbase: 82mm ★Tread: 64mm ★Weight: 113g ★Ground clearance: 8mm ★Gear ratios: 5:1, 4.2:1
*Please note that the above specifications may change with the use of different tires, rollers, etc. -
Type 1 Chassis
Designed originally as a junior sibling of Tamiya's vastly popular off-road buggies. Tire and gear settings were chosen with off-road driving in mind.
Specifications
★Length: 127mm, width: 80.5mm ★Wheelbase: 80mm ★Tread: 64mm ★Weight: 109g ★Ground clearance: 10mm ★Gear ratios: 11.2:1, 6.4:1
*Please note that the above specifications may change with the use of different tires, rollers, etc.
